Putting the switch back together is the hardest part. It's a two person job without special fixtures. By folding tape on itself so there is no sticky against the rollers. This setup will allow you to insert the carrier into the housing without the parts popping out. Note the position of the spring and the orientation of the carrier of the bottom half of the switch.

<--Previous Up Next-->

Putting the switch back together is the hardest part. It's a two person job without special fixtures. By folding tape on itself so there is no sticky against the rollers. This setup will allow you to insert the carrier into the housing without the parts popping out. Note the position of the spring and the orientation of the carrier of the bottom half of the switch.

Putting the switch back together is the hardest part. It's a two person job without special fixtures. By folding tape on itself so there is no sticky against the rollers. This setup will allow you to insert the carrier into the housing without the parts popping out. Note the position of the spring and the orientation of the carrier of the bottom half of the switch.