Edelbrock 1406 Carb Box
|
Out of the box.
|
This carb is based on the Carter AFB.
|
The center and right vacuum ports are not needed.
|
For comparison, here's the stock carb.
|
The 1406 is the electric choke version.
|
Here is a close up of the choke side.
|
And again, for reference, the original carb.
|
The backside of the 1406.
|
The back of the original carb.
|
The 1406 has the fuel inlet on the wrong side of the carb.
|
The brass fitting seen on the original carb will be transferred to the new carb.
|
Here's a close-up of the throttle linkage.
|
A shot down the throat of the new carb.
|
Here's the air cleaner on the carb.
|
The nipple doesn't give much room for a fuel line. I removed it and hard plumbed new steel line.
|
Here is the new carb installed. Note the fuel line.
|
The fuel line sits on top of the kick-down spring. A small section of fuel line is used as a protective sleeve.
|
A wider shot shows the fuel line going to the filter.
|
One last shot of the carb.
|